TD

Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from 160 to 800 models) or with metal casing steel finished in a tough epoxy-polyester paint coating(from 1000 to 6000 models).

ILT/ILB

Range of in-line rectangular duct fan manufactured from galvanised steel sheet and provided with an inspection cover that can be removed to access the motor/impeller assembly without having to remove the complete fan casing from the ducting.

IRAB/IRAT

Insulated rectangular duct fan. Very low profile design. Backward curved centrifugal impeller. Casing manufactured from heavy gauge galvanised sheet steel. 50 mm thickness of M0 glass fibre internal acoustic insulation.

CAB

Acoustic cabinet fans manufactured from heavy gauge galvanised steel sheet and internally lined with 50 mm thickness of fireproof acoustic insulation (M0).

CAB-PLUS

Acoustic cabinet fans manufactured from heavy gauge galvanised steel sheet and internally lined with 25 mm thickness of fireproof acoustic insulation (M0).

CAIB

Integrated fan, filter and heater assembly manufactured from galvanized sheet steel.

ACOP PL

Reduces the transmission of vibrations when the duct is connected directly to the fan.

ROTOREX

ROTOREX fans are used in cooling and air-conditioning systems, drying systems. ROTOREX fans are also used in general ventilation systems of industrial and public utility buildings.

ARC

Reverse fans ARC are adapted for operation as blowers and exhausters. These fans are used in ventilation installations, where the fan is connected to air ducts from the inlet and outlet.

CRV

Range of centrifugal roof mounted fans in vertical discharge format. Very low profile design. Bases manufactured from galvanised sheet steel

RS-R, RSA-R roof up stand

Regulated RS-R and RSA-R roof up stands, in standard up to 25° regulation.

RS-XX, RSA-XX roof up stand

RS-XX and RSA-XX roof up stands, where XX means angle or percent of roof slope, slope angle negotiated.

HGHT-V

Range of roof mounted axial flow fans, with vertical air discharge configuration, for air extract. Designed for smoke extraction in fi re conditions and certified F400-120 and F300-120 (HGHT-V - CE marked).

CHVB, CHVT

The CHVB-CHVT range is suitable for many general ventilation applications where high system resistances are present, i.e. systems with filters, dampers etc.

IFHT

Induction fans to induce air movement in enclosed car parkings.

CVST

For ventilation of large facilities, including industrial facilities, e.g. shops, restaurants, industrial kitchens, etc.

CMPT

Range of single inlet direct drive centrifugal fans manufactured from tough polypropylene plastic and designed for extraction of corrosive fumes.

MSBN

HPB-F

GMT

The GMT fans have found numerous applications in polluted air exhaust systems and in pneumatic transport systems

GSB

GSB ventilators transports clean air.

GSB / MSB - old

GSB Ventilators: transport of clean air. MSB Ventilators: transport of dust-containing air.

HST

HST fans are designed for transporting clean air; they have found a wide range of applications in the industry, where manufacturing processes require small amount of high-pressure air.

SC-F

A side-channel, directly-driven fan designed for an oil-free conveying of non-aggressive and non-explosive gases or for generating positive and negative pressure.

EBB DESIGN

The EBB Design extractor fans are suitable for many domestic and commercial ventilation applications where higher system resistance pressures are encountered.

SILENT ECO

Flush and Surface-mounted fan for venting bathrooms, WCs, non-commercial kitchens, storage rooms, etc. Suitable for connecting to a shared rising mains (single pipe system), for wall and ceiling installation.

CK

Range of centrifugal extractors specifically designed for the extraction of moist, grease laden air and fume from under domestic cooker canopies. This range consists of six models with airflow ranging between 250 and 625 m3/h. All the models are fitted with single phase motors.

IDEO

Whole house heat recovery unit with a high-efficiency heat exchanger up to 95% with constant flow, setting and very low consumption DC motor.

COR-FT

Most of warehouses are provided with large entrance and exit doors for the goods that usually stay open for an extended period of time causing in a few minutes the loss of the indoor heated air.

COR N

Most of warehouses are provided with large entrance and exit doors for the goods that usually stay open for an extended period of time causing in a few minutes the loss of the indoor heated air.

HUF

Filtration set HUF 620 is a high-quality air cleaner which supplies fresh are that is free of dust.

V-23, V-24

REB-ECOWATT

REB-ECOWATT - s³u¿y do zewnêtrznej regulacji prêdko¶ci obrotowej silników pr±du sta³ego z elektronicznym komutatorem (TD-ECOWATT).

Inverters

Inverters are used for electronic control of rotational speed of one fan or a whole group of fans.

PULSER

A device controlling heater based on user-defined temperature setpoint (0-30^oC), or internal temperature setpoint.

PULSER-D

A device controlling heater based on user-defined temperature setpoint (0-30^oC), and external temperature sensor (not included).

TTC-2000

A device controlling heater based on user-defined temperature setpoint (0-30^oC), and external temperature sensor (not included).

TTC

Devices controlling heater based on user-defined temperature setpoint (0-30^oC), and external temperature sensor (not included).

TT-S1

Control board for use with TTC-2000 controllers. TTC-2000 with TT-S1 is used to control two sections of a heater (with equal power).

TBI

Control potentiometer for use with PULSER, PULSER-M, PULSER-D,TTC-2000, TTC-25, TTC-40F.

TG-R

Room temperature sensor for use with PULSER, PULSER-M, PULSER-D, TTC-2000, TTC-25, TTC-40F.

TG-K

Channel temperature sensor for use with PULSER, PULSER-M, PULSER-D, TTC-2000, TTC-25, TTC-40F.

CR-Automatic

Controller CR-Automatic – a controller supporting selected air curtains (see specification sheet for air curtains), used for manual speed control (0-I-II-III) and heating power (0-I-II) of the curtain.

TM-1

An electronic channel thermostat. Two working options - turning a heating unit or a ventilator ON or OFF at a predefined temperature(a change-over switch).

TS-3

Wall-mounted thermostat (with a bellows element made of stainless steel) that turns a heating element of a ventilator ON and OFF at predefined temperature (a change-over switch).

Differential pressure control

Differential pressure control for turning a device ON or OFF at predefined differential pressure between two measuring points. The set includes a hose made of flexible plastic (total length 2m) with internal diameter of 6mm, and 2 probes.

Timer ZN-62

Timer ZN 62 is an accessory for turning on the fan with approx. 1 min. time lag and turning off with 5-10 min. time lag (not controlled).

0-Y-D switch

0-Y-D switch for one-speed three-phase motors – manual switch providing gentle start-up of motor (0-Y-D) which nominal winding is delta-connected (D).

Switches for two-speed three-phase motors

Switch for two-speed three-phase motors